Doors and windows are an important part of the home decoration field. With it, we can live and play more confidently in the house. However, the installation of doors and windows is also very particular. Once installed, the safety of our lives and property will be Not guaranteed. So, how much do you know about the installation specifications for doors and windows?
1. Check the presence or absence of corners, curls, bends, and splits before installing the door and window frames and fans. If any of the above conditions, repair them first.
2. The side of the door and window frame and the ground should be painted with anti-corrosion paint. The other surfaces and the fan should be brushed with oil. After the oil is brushed, the classification code is flat and the bottom layer should be flat and high. Each layer of frame and frame, fan and fan between the wood planks are ventilated, such as when stacked in the open air, need to be covered with a cloth, not allowed to be exposed to the sun and rain.
3. Before installing the outer window, hang vertically from top to bottom, find the position of the window frame, and the upper and lower sides should be processed first. The installation of the window installation, the +50cm flat wire is played well in advance, and the installation position is marked on the wall.
4. The installation of the door frame should be verified according to the size of the drawing, and the direction of the cutting should be paid attention to when installing according to the drawing opening direction. The installation height is controlled by the indoor 50cm flat line.
5. Door and window frame installation should be done before plastering. The installation of the door leaf and window sash should be carried out after the plastering is completed. If the window sash must be installed first, attention should be paid to the finished product protection to prevent collision and pollution. Operation to find the ruled elastic line, find the door and window frame installation position → cover fan and installation model → window frame, fan installation → door frame installation → door fan installation to find the ruled elastic line: after the structural engineering has passed the verification, you can start with the big line from the top layer Vertically, the accuracy of the window position is checked, and the ink line is ejected on the wall, and the structure of the door and window opening is scissored when the window frame line protrudes.
